IC-XMobile
Single / Multiple Web Widths* - Mobile Factory
Max 1.6mm Steel Thickness
Production Type: Truss, Wall Panel, Lattice Joist
Supported Machines: 1000Series – 2000Series
Option List: Generator, Air Conditioning, Thermal Insulation, Crane Types, Container Types, Office, Kitchen, Toilet
Web Width: 60 and/or 90 and/or 150
Number of Punches: 7 + (Dimple, Web Notch, Lip Notch, Service Hole, Truss End, Swage, Cut to Lenght) + Custom Punch Request
Dimention: 12000 x 2900 x 2500 mm
Weight: 5000kg +
Machine Software Licensing: Lifetime Free License
Supported Design Programs: Vertex BD, FramerBuilder MRD, Strucsoft
With the IC-XMobile unit, you can produce mass housing or multi-structure projects directly on-site, eliminating the need to spend time on logistics. The unit comes with an optional generator. You can either use the generator to operate IC-XMobile entirely off-grid in remote locations or connect it to the local power supply to produce on any construction site with available electricity.
IC-XMobile supports only the 1000 and 2000 Series machines and works with steel sheets up to a maximum thickness of 1.6 mm.
Lip Notch
Lip notch is applied to facilitate the assembly of profiles that will interlock during installation. The lips are automatically applied during production.
Swage
Swage – Section Reduction, is automatically applied to specific areas of the profile to facilitate easier assembly. During installation, this allows profiles to easily interlock. This punch ensures that the cladding or drywall sits completely flush against the frame and provides enhanced final durability at the intersections of the studs and plates.
Dimple
Flange Punching (both right and left sides of the profile) creates small holes in the center of the flanges. This system is used to correctly position the joined profiles and ensure that the heads of the countersunk bolts are flush with the profile wall. This allows the drywall to sit smoothly against the frame.
Service Hole
Service Holes are automatically applied to wall panels in areas specified during the design phase. These holes are created in the panels during design where cables or plumbing are required, and they are automatically implemented on the profiles during production. The cables or pipes to be used are run through these holes.
Truss End - Chamfer Cut
The produced profile can have this feature applied at either the beginning or the end. It is used to provide a better and easier connection at angular joints. During assembly, the part of the profile that touches the base is rounded, making angled installations like Roof Trusses much easier and more secure.
Web Notch
Base Notching is automatically applied to the profile to facilitate easy assembly during installation when profiles interlock with each other. This punch is applied to the base area of the profiles during production.
Special Punch Portfolio – Special Punches
Over the years, our company has designed a unique portfolio of dies that differ from standard options. You can select the die that best suits your needs from our optional die portfolio and use it with any of our machines.
New Special Punch Production – Special Punches
Completely custom die systems can be designed for use in your projects. The designed dies can be easily used with the machine you request.
* For optional, custom-designed die systems, please contact our sales department.
SABS - STEEL ANTIBLOCKING SYSTTEM
One of the major problems observed in light steel structure machines is the jamming of metal sheets within the machine and the accordion-like compression of the sheet in the rollform. Clearing such a blockage within the machine can take approximately 3 to 4 hours, and sometimes even longer depending on the severity of the jam. While there are many causes for this issue, it is generally seen with thinner sheets (up to 1.6mm). This problem has been addressed in UNBAK's 1000 and 2000 series by a specialized system. With UNBAK’s designed SABS (Sheet Anti-Blockage System), revisions made to the molds prevent the sheet from jamming inside the machine, ensuring a smooth production process.
REMOTE CONTROL
The remote control system used in UCARUS LSF machines is an equipment that allows you to utilize all features of the machine from up to 30 meters away, distinguishing it from industry standards. With this equipment, an operator can manage all aspects of the machine independently. The features of this equipment are updated with feedback from our customers for each version.
With the remote control, you can: - Control the movement of the sheet forward and backward -Manage the uncoiler -Manually press each mold -Turn the hydraulic system on and off -Execute an emergency stop -Cut the metal sheet
MANUEL AUTOMATIC PRODUCTION
With the manual-automatic production add-on to the FRAMER EXPERT4™ software designed by UCARUS LSF™, you can manually input all profile details without relying on any specific building design program. This allows you to produce the desired profiles in the shapes, sizes, and quantities you need. By using only the machine’s screen, you can create your profiles and initiate mass production. Manually input the profile dimensions and mold data into the machine screen for automatic production of profiles. These profiles can be produced for predetermined projects or for stocking purposes.
COMPLETE GEAR-DRIVEN DESIGN
ICARUS LSF light steel structure machines employ a gear-driven system in the rollform process, regardless of the thickness of the steel sheet. This design eliminates the common problems associated with chain breakage, such as production downtime and maintenance issues. By using a gear-driven mechanism, the machines ensure a more reliable and consistent operation, reducing the need for frequent maintenance and increasing overall production efficiency. This results in a smoother production process and higher precision in the final products. Furthermore, the robust nature of the gear-driven system enhances the machine’s durability, making it a preferred choice for continuous and high-demand production environments.
MACHINE PORTFOLIO
Filtreler
ICARUSLSF MACHINE COMPARE CHART
ICARUS LSF Machine Comparison: IC-10000 Series, IC-20000 Series, IC-30000 Series, IC-50000 Series, IC-70000 Series
COMPANIES WORKING WITH US
OUR SOLUTION PARTNERS
Wall Panel
In building designs, details such as internal and external walls, doors, and windows are automatically calculated in the design program, and steel wall panels are created in the form of frames.
Truss
In building designs, details such as internal and external walls, doors, and windows are automatically calculated in the design program, and steel wall panels are created as frames. Roof Truss
Lattice Joist
There are several ways to create floors between levels in light steel structures. The most common and well-known method is the Lattice Joist System
Floor Joist
There are several ways to create floors between levels in light steel structures. The fastest to produce among them is the intermediate floor chassis system. * Only 3000-5000-7000 SERIES machines are supoort Floor Joist
DIFFERENT and SPECIAL PUNCHES
ICARUS LSF light steel structure machine family, developed by UNBAK Machinery CO LTD as a result of 33 years of rollforming experience, offer a variety of molds for different purposes and can design molds based on your 2D drawings, helping you create the desired profiles and connections.
The different mold types available in UNBAK include Hexagonal Mold, Oval Service Hole, Multi-Dimple, Rectangle Mold, Flange Bolt, customized hole groups for different diameters, and many other special mold sets that can be offered as optional features with the machines to our customers.
Light Steel Constructions
News from UNBAK
Cost Reduction in Light Gauge Steel Construction
The Role of Stairs in Light Gauge Steel Structures
Light Steel Factory and Warehouse Construction: How?
Importance of Steel Thickness and Web Width in LGS
Frequently Asked Questions
What are the most common issues customers experience after purchasing the product?
Our machine is user-friendly, but an operator without sufficient experience or training may find it difficult to set up the machine properly. Therefore, the initial training we provide at our facility plays a crucial role in ensuring the longevity of the machine and error-free production for the buyer's operator.What is your company’s maximum commitment time for initiating the resolution of an issue?
When you become a part of the UNBAK Family, a WhatsApp group is created as a priority to quickly manage our after-sales services. Issues such as production errors and operator questions are addressed within the first 5-15 minutes. In the second phase, we remotely connect to the machine and inspect it through the software, fixing any issues that can be corrected immediately. In the third phase, we conduct a video call via WhatsApp for problem identification and resolution. If a spare part replacement is deemed necessary during this phase, it will be shipped from our stock to your location, no matter where you are in the world. If the problem cannot be resolved in the third phase or requires faster intervention, a visit to your workplace is planned and carried out.In an emergency, our technician team will visit your factory to resolve the issue on-site.We prefer to train your operator at our facility before the delivery of your machine. Typically, we invite the customer’s operator to our facility just before the machine's delivery.Can a specific production sequence be programmed for home assemblies (walls, beams, and trusses)?
The sequence of operations can be arranged through VertexBD, Revit-Strucsoft, and Framebuilder MDR programs.Is there software that stops the machine when each wall/beam/truss package is completed?
Yes, there is. The machine will stop and give a warning 10 meters before the project cycle is completed.Does your company offer or know of third parties that can take our home design and production guidelines to create the frame machine file? This is likely a service we will consider.
Our software partners are VertexBD, Revit-Strucsoft, and Framebuilder MDR. Training on design software is provided by us to a person designated by the machine owner.
Why UNBAK
UNBAK Machinery's development process rises on rollforming machinery and software. You can find UNBAK's 33 years of rollform machinery experience and gain a clearer understanding of why customers from all over the world prefer us.
Light Steel Applications
Discover the flexibility, durability and variations of light steel structure applications and potentials achievable with UNBAK LSF steel frame machines and systems. See what you can do with our systems.
Resources
On this page, you can find details about all the machines included in the UNBAK LSF Steel Framing family, as well as comprehensive documents related to light steel structures and gauge steel connection details.
Contact US
You can reach us by phone, email, or through the live support panel on our website. For service requests, please fill out the service form, and we will contact you promptly.
